Products

Lotti Fix Power Tile Adhesive C2TE

Cement based floor and wall granite adhesive mortar with high performance, reduced slip property.

► Cement Based
► Horizontal, Vertical Surfaces
► Indoors and Outdoors
► High Adhesion Strength
► Suitable for Heavy Pedestrian Traffic
► Low Consumption

> Grey / White

USAGE AREAS

• Horizontal and vertical applications in Indoor and outdoor,
• Application of small and medium sized plates such as granite ceramic, porcelain to smooth or irregular concrete surfaces,
• Balconies, terraces, wet areas,


Description

FEATURES&ADVANTAGES
• Easy to prepare and apply.
• Since it is not necessary to apply adhesive mortar on the back surface of the plates, the application speed increases.
• Thanks to its flowing consistency, it is easily and quickly applied to the surface with a toothed comb.
• It has long penetrating time.
• It has high adhesion strength.
• Resistant to freeze-thaw cycle.

APPLICATION INSTRUCTIONS
a) Surface Preparation:
Take care that the application surface should be solid, dry, carrier, dust-free and clean and at the same time in balance. The surface should be thoroughly cleaned of all kinds of oil, grease, rust and paraffin residues that will weaken the adherence and there should be no loose particles on the surface. Damaged surfaces with a depth of 5 to 20 mm should be repaired with Lotti Repair Mortars two days in advance. If the temperature of the surface to be applied is above + 25°C, the surface should be moistened.

b) Product Preparation:
The water in appropriate amount is poured into the clean mixing vessel with a scale. 1012 Granifix is added slowly and mixed with a 400-600 rpm mixer for 3-5 minutes until a uniform and lump-free mixture is obtained. After resting for 3-5 minutes and mixing again for 30 seconds, the material is ready for use.

c) Application Method:
Lot201 Power layer of 1 mm thickness is applied to the application surface with the flat side of the trowel. Lot201 Power is applied in one direction in such a way that a uniform thickness is obtained with the toothed side of the trowel to an area that can be covered within 20 minutes, open waiting time. For the bonding of tiles or ceramics with different thicknesses, it is recommended to apply 1 mm thick mortar under each tile or ceramic in order to cover the defects on the application surface. When applying tiles or ceramics in place, the tiles or ceramics are floated in the mortar to ensure that the 1012 Granifix is fully in contact. Application is completed by leaving the recommended joint gap according to the appropriate tile or ceramic size. Lotti Joint Fillers should be used to fill the left joint gaps. Joints can be applied after approximately 24 hours.

Reviews

There are no reviews yet.

Be the first to review “Lotti Fix Power Tile Adhesive C2TE”

Your email address will not be published. Required fields are marked *

    Lotti Building Chemicals which includes a total of 58 products under three main product categories, it is aimed to make a significant contribution to the process of brandization in Turkey as well as in abroad countries through offering of epoxy and polyurethane systems, ceramic adhesives, joint fillers and maintenance products, and outer façade insulation materials.

    ADDRESS

    Altıntepe Mh. E. Bagdat Cd. No:19/1 Istanbul/Turkey

    PHONE

    +905357812191

    EMAIL

    info@lotti.com.tr

    Cart