Products

2002 Fuga Flex

It is a high performance, flexible, cement based joint filter that can be used indoors and outdoors, suitable for 1-6 mm joint gap.

► Cement Based
► Very Flexible
► Horizontal, Vertical Surfaces
► Indoors and Outdoors
► Mold and Fungus Resistant
► Low Consumption

> See Color Chart
> Public Works Pos No: 04.013/2

Description

It is used for;
• Indoors,
• Horizontal and vertical applications,
• Filling joints of ceramic, tile, granite, granite ceramic, porcelain ceramic coating materials up to 1-6 mm.
• It has not fading, dusting and cracking.
• Provides smooth surface.
• Adheres well to ceramic edges.
• Resistant to abrasion.
• Offers a rich color selection and is decorative.

a) Surface Preparation:
It should be paid attention that the ceramics are well adhered in order not to move during application, and the adhesive should be completely dry. Any dust, dirt, sawdust, construction and cement residues remaining in the joint gaps on the surfaces where the flooring process is completed should be thoroughly cleaned with a thin rod or brush. Make sure that the joint gaps are at least 2/3 of ceramic thickness. The cleaned gaps should be moistened with a wet sponge.

b) Product Preparation:
20 kg 2002 Fuga Flex joint filter (1-6 mm) is added into about 6-7 lt of clean water and mixed preferably with a low speed mixer until no lump remains. Pay attention to the amount of water to be added to the powder mortar, avoid application in the form of grout added excess water. Excess water added to the mortar will cause cracking, easy wear and dusting. The prepared grouting material in thick consistency is left to rest for 5 -10 minutes for maturation and used after mixing for 1 -2 minutes again. The mixture in the container should be consumed within about 1 hour.

c) Application Method:
The joint sealant must be filled into the joints with a hard rubber tipped squeegee or hard rubber based joint spreading trowel. In order to fully fill the gaps, they must be pulled first parallel and then crosswise. The excess of the mortar on the surface should be peeled off with a moistened soft tip spatula, after waiting for 15-30 minutes according to the ambient temperature, wiped with a damp sponge and the thin joint layer that may remain on the surface should be cleaned thoroughly. Joint cleaning should not be started prematurely. It should not be wiped with excess wet sponge in order not to cause color fluctuation. The sponge used should be cleaned frequently. It dries on walls after 24 hours, can be walked on floors after 48 hours, can be opened to pedestrian traffic after 7 days.

• White
• Ivory
• Cream
• Beige Bahamas
• Jasmin
• Istanbul Beige
• Paper Bag
• Cappadocia Beige
• Light Pink
• Pink
• Yuruk Beige
• Brown
• Red Brown
• Dark Brown
• Pool Blue
• Atlas Blue
• Light Gray
• Gray
• Anthracite
• Black

Reviews

There are no reviews yet.

Be the first to review “2002 Fuga Flex”

Your email address will not be published. Required fields are marked *

    Lotti Building Chemicals which includes a total of 58 products under three main product categories, it is aimed to make a significant contribution to the process of brandization in Turkey as well as in abroad countries through offering of epoxy and polyurethane systems, ceramic adhesives, joint fillers and maintenance products, and outer façade insulation materials.

    ADDRESS

    Altıntepe Mh. E. Bagdat Cd. No:19/1 Istanbul/Turkey

    PHONE

    +905357812191

    EMAIL

    info@lotti.com.tr

    Cart