Products

3008 Elastico 2K

It is cement and acrylic based, semi-elastic, two component waterproofing material. The two components should be mixed together to provide insulation. It is resistant to positive water pressure.

► Cement and Acrylic Based
► Semi Elastic
► Two Component
► For Waterproofing Purposes
► Easy to Apply
► Low Consumption

> Grey
> Public Works Pos No:

Description

It is used;
• Indoors – outdoors, vertical and horizontal applications from the direction of water,
• On terraces (on condition of protection)
• In wet areas such as WC, bathroom, kitchen and balcony,
• Insulation in flower head.
• Semi-flexible and waterproof.
• Easy to prepare and apply.
• Can be applied by brush or spraying machine.
• Has long working time.
• Due to its high adhesion performance and semi-flexible structure, it forms a waterproof layer under screed and ceramic.
• It forms jointless, seamless, permanent, waterproof coating.
• Resistant to chemicals and salt solutions in soil.
• Water vapor permeable.
• Resistant to freeze-thaw cycle.

a) Surface Preparation:
It should be ensured that the cement-based surfaces in contact with water are solid, dry, carrier, dust-free and clean and at the same time in balance. The surface should be thoroughly cleaned of any oil, grease, rust and paraffin residues that may weaken the adherence and there should be no loose particles on the surface. Iron and wooden wedges on the surface should be removed and if any, active water leakages and gaps should be filled with Lotti Sealant Mortar or Structural Repair Mortar, and corners and edges should be chamfered at least 4 cm radius. Application surface is wet and wait until the application surface is wet and dry/wet. If the coating material loses water immediately and becomes matt, it is understood that the surface is not sufficiently wetted or dries quickly. In such cases, when the air is hot or the materials remain in the wind, only 10% of component B can be added to the mixed material for the first layer.

b) Product Preparation:
Liquid component B (3008 Elastico 2K) is poured into a clean application bucket and powder component A (3008 Elastico 2K) is added slowly and they are mixed with a 400-600 rpm mixer for 3-5 minutes until a homogenous and lump-free mixture is obtained. After resting for 3-5 minutes and mixing again for 30 seconds, the material is ready for use.

c) Application Method:
Prepared 3008 Elastico 2K mixture is applied in two or three layers with the help of a Thoro brush. The direction of brush application on each layer should be perpendicular to each other. Waiting time between coats varies according to ambient conditions.

Reviews

There are no reviews yet.

Be the first to review “3008 Elastico 2K”

Your email address will not be published. Required fields are marked *

    Lotti Building Chemicals which includes a total of 58 products under three main product categories, it is aimed to make a significant contribution to the process of brandization in Turkey as well as in abroad countries through offering of epoxy and polyurethane systems, ceramic adhesives, joint fillers and maintenance products, and outer façade insulation materials.

    ADDRESS

    Altıntepe Mh. E. Bagdat Cd. No:19/1 Istanbul/Turkey

    PHONE

    +905357812191

    EMAIL

    info@lotti.com.tr

    Cart