Products

Description

• As a topcoat decorative coating material in jacketing systems,
• Used on interior and exterior plasters.
• It is also suitable for interior use of buildings for decorative purposes.
• Easy to apply, provides excellent adhesion.
• It has a decorative appearance and provides a homogeneous application.
• Wavy appearance caused by improper application of thermal insulation systems can be corrected.
• Water and frost resistant.
• It is resistant to external influences and protects the structure for many years.
• Water vapor permeable, allows the surface to breathe.
• Exterior paints can be applied on it.
• Reduces product consumption with fine grain texture.

a) Surface Preparation:
Minimum 12 hours after the application of primer on the surfaces where the thermal insulation board plaster mortar or thermal insulation board plaster and jacketing primer is applied, 4003 Lotti Dekor Grain and Line Textured application is applied.

b) Product Preparation:
25 kg 4003 Lotti Dekor, Mineral Textured – White (Thin-Thick) is added into approximately 6 – 6.5 liters of clean water and preferably mixed with a low speed mixer so that no lump remains. The prepared mortar is left to mature for 5-10 minutes and used by mixing again for 1-2 minutes. The mixture in the container should be consumed within 1,5-2 hours.

c) Application Method:
The material should be applied with a steel trowel and spread over the entire surface of equal thickness. The application thickness should be adjusted to the largest aggregate. Within 10 minutes at the latest, when the material is still wet, make a circular pattern with a plastic trowel to give the plaster a pattern. If the air temperature is high after the application is completed, moisten the surface until the cement sets.